mobile_screener_eco2

Screener on Hooklift Frame

ECO2 the compact but powerful screener.
It is compact. It consumes very little energy. It is quiet.
But it is equipped with one of the world’s most powerful screen boxes of its size, so powerful that it is built on a separate vibration blocking frame.

The screen in the ECO2 operates with a stroke of 12 mm, which enables screening of traditionally difficult-to-sort materials, not least in recycling. It gives you cleaner fractions, and in many cases a longer season.

Of course the ECO2 is electric. (It can be equipped with a built-in diesel generator if needed.) Electric power is a cornerstone for the creation of a greener future. Electric machines have superior operating economy and are easy to troubleshoot and service.

We have been building electric screening plants since the 80’s.
Make use of our long experience of the future.

Dimensions & Weight

  • Transport Length: 6.6 m
  • Transport Width: 2.3 m
  • Transport Height: 2.6 m
  • Weight: approx. 10 tons (depending on equipment)

Options

  • On-board dieselgenerator
  • Reject grid
  • Ball deck
Deck
Illustration showing the double decks of the EC03 screening plant for efficient material separation

2

Screen area
Diagram of the EC03 screen area with dimensions 1.2 x 2.2 meters for optimal sorting capacity

1.2 x 2.2

Weight
Graphic indicating the EC03 screening plant's total weight of 12,000 kilograms

10.000

Transport
Icon depicting the EC03's transport method using a hook lift for easy relocation.

Hook lift

On mains
Symbol for EC03's energy efficiency, requiring only 12 kWh on mains operation

12 kWh

Diesel
fuel pump

3 l/h

Set-up time
Hourglass symbolising the EC03's quick setup time of only 3 minutes.

3 minutes

Schematics: ECO2

Questions & Answers

1. What type of diesel engine does it have?

A Stage V liquid-cooled, four-cylinder engine that drives a 30 kVA generator. The engine has a fixed speed of 1500 rpm, making it both quiet and cost-effective. It is mounted on a sliding frame for easy access.

2. How do I change the screen mesh, and how long does it take?

The top deck mesh is side-tensioned and tightened with four bolts on each side. The bottom deck is length-tensioned and tightened with only two bolts. The nose of the screen is foldable for even better access to the bottom deck. It can be done by a single operator, and after a few changes, it takes about 15 minutes per deck.

3. How much does a screen mesh cost?

A standard mesh for the top deck costs between 3000-4000 SEK. For the bottom deck, it’s 2500-3000 SEK

4. How do I sort only one fraction?

Only use the upper deck for sorting and leave the lower deck empty. The tensioning profiles in the bottom deck need to be fastened in order to prevent wear and tear, the tensioning profile in the rear needs to be removed from the screen box.

5. What is the feed-in-height of the hopper? What kind of loader is suitable?

The loading height is 2.6 meters. The ideal wheel loader size is a Volvo L70, L90, or equivalent. Smaller machines can also work, but an access ramp may be needed.

6. Is a vibrating feeder suitable when producing top soil?

The vibrating feeder of the ECO2 is designed to handle even difficult material, as it operates with a more powerful movement and lower rotation speed than common vibrating feeders. The benefit of a vibrating feeder is the versatility, it can be used for almost any kind of material.

7. Is it possible to adjust the feeding speed?

Yes, the variable speed driver is controlled via the radio transmitter (also used for tipping of the reject grid).

8. What parts usually need to be replaced?

The ECO2 is a very robust plant featuring a lot of the same proven components as the larger Maskin Mekano plants. It is essential to retighten the screening media after a while to minimize the strain. If the filters and the oil of the motor are changed according to recommendations and the lubrication points are greased every 40th hour there is usually no need to replace any parts.

9. How many lubrication points are there? Can it be fitted with centralized lubrication?

It is possible to fit the ECO2 with centralized lubrication, but most customers chose not to since there are only 4 lubrication points that are very accessible and only need to be greased every 40th hour. To lubricate the bearings of the cylinders once every year is also recommended.

10. What is the weight of the machine?

10 tons as standard, in most countries it can be transported with a standard hook-lift bogie truck.

11. What is the fuel consumption?

The ECO2 has a fuel consumption of only 3 l/h.  

12.The machine is very quiet, how is that possible?

The rotation speed of the diesel generator is only 1500 rpm. The screen box is mounted on a vibration damped frame which prevents the vibrations from the screen from transmitting to the chassis, this also contributes to the low noise impact. If you run it on electricity it is of course more quiet.

13. How long is the set-up-time?

For transport mode the conveyors are folded, this is done hydraulically without any need for manual handling. It is ready for transport in 3 minutes and ready for production in the same time.

14. And the capacity?

The ECO2 is suitable for a vast range of recycled material such as asphalt, concrete, landfill and so on, but also for building material and scrap and of course traditional sorting tasks. The capacity when producing top soil is 30-150 tones/h, depending on how moist the material is. For other materials the capacity is usually between 100-200 tones/h.

Advantages of Maskin Mekano Products

Climate Footprint

Electric Drive OR Low Emissions

Vibration-Free

Vibroblock Concept

Screening Performance

Aggressive Impact

Safety

Protection According to Regulations

Overview

Touchscreen

Noise Level

Low

Manufacturing

In Sweden

Would you like more information about ECO2or maybe a quote, or leasing options?